accessory kits platforms and services the digi connect me 9210 family of embedded modules enables secure wired and wireless networking. built on digis powerful ns9210 arm9 processor, these high-performance modules allow customers to implement next generation network-enabled products. additionally, their rj-45 form factor is pin compatible with modules in the digi connect me family. these modules can provide future application-specifc interface options through the programmable flexible interface module (fim), while keeping the main serial port or other key peripheral interfaces available. they are well-suited for more advanced core module applications by supporting up to ten shared gpios, external irqs and an extended set of peripheral interface options. the digi connect me 9210 family features the development and operational benefts of the device cloud by etherios ? . this secure, highly-scalable platform seamlessly ties enterprise applications and remote devices together. using device cloud, customers can also easily confgure, upgrade, monitor and troubleshoot their devices from a centralized location. ultra-compact high-performance embedded modules for m2m networking combine on-chip security and integrated 802.11b/g/n wi-fi or ethernet networking. ? secure 802.11b/g/n wi-fi support ? integrated 10/100 mbit ethernet interface ? support for digi embedded linux and digi net+os ? industrial operating temperature system-on-module ? rj-45 form factor compatible with digi connect me ? on-chip hardware encryption engine ? extended set of on-chip interfaces and signals ? power management modes ? low-emission design (fcc class b) ? seamless migration to net+arm chip design compact and powerful wired and wireless embedded modules digi connect me ? 9210 family design services support supported software platforms spi 8 mb flash 16 mb sdram 10/100 ethernet mac uart gpio phy mem ctrlr arm arm926ej-s 75 mhz jt ag jt ag connector uart 20-pin connector power mgmt aes accelerator drpic165x fim i 2 c spi spi 802.1 1bgn wi-fi radio rp-sma antenna connector digi connect wi-me 9210 rj-45 w/integrated magnetics digi connect me 9210 net os www.digi.com overview block diagram features/benefts
digi jumpstart kits? overview digi jumpstart kit? for net+os digi jumpstart kit? for embedded linux this royalty-free turnkey solution for embedded software development is based on the threadx real-time operating system (rtos), one of the most reliable and feld-proven rtos solutions available. in addition to threadx, net+os provides the integrated building blocks needed to create product solutions with leading network security using digi embedded modules and microprocessors. for professional net+os software development, the eclipse based digi esp? integrated development environment (ide) with graphical user interface and high-speed usb 2.0 hardware debugger is provided out-of-the-box. ? royalty-free turnkey solution for embedded software development ? built on feld-proven and compact threadx rtos ? fully integrated support for secure, ipv4/ipv6 networking applications ? professional software development using windows-based digi esp ide built around a standard linux 2.6 kernel distribution, the digi jumpstart kit for embedded linux is tailored to the specifc needs of embedded linux development and provides an easy-to-use, complete off-the-shelf embedded development platform. it includes all components that are required to build secure network-enabled products based on the digi connect me 9210 family. the kit includes digi esp? for embedded linux, a powerful and fully linux-hosted integrated development environment based on the open eclipse? framework. ideal for new and experienced linux developers, digi esp improves software design productivity by accelerating and greatly simplifying driver and application development through a user-friendly graphical interface. ? off-the-shelf development platform for network-enabled embedded systems ? royalty-free and with optimized 2.6 kernel and services support ? linux digi esp ide for accelerated software development ? full linux and digi bsp source code included development kits digi jumpstart kits? contents software platform net+os embedded linux module digi connect me 9210 or digi connect wi-me 9210 w/ 8 mb flash, 16 mb sdram development board 1 rs-232 serial port, gpio confguration switches, screw terminal for gpio signals, prototyping area, status leds (serial, gpio, power), logic signal header, test points, reset button, user/wake-up buttons, poe module header, 9-30vdc power supply, jtag header and rs-232 console/debug port for jtag-equipped modules cd/dvd digi net+os cd: net+os 7, digi esp ide, bsp source code, sample code, green hills multi ide support fles, user documentation digi embedded linux 4 dvd: digi embedded linux, digi esp ide, linux and platform specifc source code, universal boot loader source code (u-boot), sample code, documentation documentation quick start guide, digi esp tutorial, net+os porting guide, net+os api documentation, advanced web server, hardware reference manual, development board schematics quick start guide, digi embedded linux users guide, hardware reference manual, development board schematics power supplies and accessories external wall power supply (110/240vac) with interchangeable outlet adapters (north america, eu, uk, and australia), crossover serial cable, ethernet cable other digi jtag link usb 2.0 hardware debugger n/a kit part numbers ethernet only dc-me-9210-net dc-me-9210-lx wlan + ethernet dc-wme-9210-net DC-WME-9210-LX please refer to the feature specs on our website for detailed information about the specifc software platform capabilities. digi connect me kits shown
hardware processor type 32-bit digi ns9210 processor arm core arm926ej-s processor speed 75 mhz cache 4k i/d cache memory base population support up to 8 mb nor flash support up to 16 mb sdram flexible interface modules (fims) 300 mhz drpic165x cpu; 2k program/192 bytes data ram on-chip 256-bit aes accelerator ? power management modes on-the-fy clock scaling; low-power sleep modes; confgurable scaling/wake-up events (eirq, uart, ethernet, etc.) pins/form factor rj-45 connector style with 20-pin micro pin header (samtec fts-110-01-f-dv-tr) high-speed ttl serial interface full signal support (txd, rxd, rts, cts, dtr, dsr and dcd); hardware/software fow control gpio 10 shared; up to 3 external irq options spi master data rate up to 16.7 mbps; slave data rate up to 7.5 mbps i 2 c v1.0 bus interface; 7-bit and 10-bit address modes flexible interface support (fim) uart, 1-wire, usb device (low-speed), can bus watchdog timer (16-bit) ? jtag interface available on development modules only on-board power supervisor ? wave-solderable design no clean fux process dimensions (l x w x h) 1.445 in (36.7 mm) x 0.75 in (19.05 mm) x 0.735 in (18.67 mm) network interface - wired physical layer 10/100base-t n/a data rate 10/100 mbps (auto-sensing) n/a mode full- or half-duplex (auto-sensing) n/a connector rj-45 w/ magnetics n/a poe power pass-through 802.3af compliant (mid- and end-span) n/a network interface C wireless lan standard n/a ieee 802.11b/g/n frequency n/a 2.4 ghz data rate n/a up to 65 mbps with automatic fallback modulation n/a cck (11/5 mbps), dqpsk (2 mbps), dbpsk (1 mbps), ofdm (6, 9, 12, 18, 24, 48, 54 and 65 mbps) typical transmit power n/a +17 dbm receive sensitivity n/a -69 dbm @ 54 mbps connector n/a 1 x rp-sma wlan security wep (wired equivalent privacy) n/a 64/128-bit encryption (rc4) wpa/wpa2/802.11i n/a 128-bit tkip/ccmp (aes) encryption. enterprise mode (802.1x): leap (wep only), peap, ttls, tls, eap-fast, gtc, md5, otp, pap, chap, mschap, mschapv2, ttls-mschapv2. pre-shared key mode (psk/personal). environmental operating temperature -40 c to +75 c (-40 f to +167 f) -40 c to +85 c (-40 f to +185 f) with external thermal pad* storage temperature -50 c to +125 c (-58 f to +257 f) relative humidity 5% to 90% (non-condensing) altitude 12,000 feet (3,658 meters) digi connect me ? 9210 specifcations ? module feature *please see hardware reference manual for detailed information digi connect wi-me ? 9210
power requirements (3.3 vdc) maximum 450 ma (1.485 w) typical 346 ma (1.14 w) uart and ethernet activated idle 186 ma (613 mw) /16 clock scaling, ethernet activated C sleep 3.3 vdc @ 34 ma (113 mw) 3.3 vdc @ 142 ma (486 mw) regulatory approvals fcc part 15 class b, en 55022 class b ? en 61000-3-2 and en 61000-3-3 ? ices-003 class b, vcci class ii, as 3548 ? fcc part 15 sub c section 15.247 ? ic rss-210 issue 5 section 6.2.2(o) ? en 300 328, en 301 489-17 ? ul 60950-1, en 60950 (eu) ? csa c22.2, no. 60950 ? en 55024 ? intentional radiation ? ? module feature pin uart gpio ext irq i 2 c spi fim other 1 veth+ 2 veth- 3-6 positions removed 7 rxd gpio[3] in pic[3] 8 txd gpio[7] out timer out 7 timer in 8 9 rts gpio[5] 3 clk timer out 6 10 dtr gpio[6] timer in 7 11 cts gpio[1] 0 pic[1] 12 dsr gpio[2] 1 pic[2] 13 dcd gpio[0] en pic[0] 14 /rst 15 3.3v 16 gnd 17 gpio[12] sda clk reset_done 18 gpio[9] 0 scl 19 reserved 20 gpio[13] clk init timer out 9 module pinout visit www.digiembedded.com for part numbers. ? 2009-2013 digi international inc. all rights reserved. digi, digi international, etherios, the digi logo, the device cloud by etherios logo, digi connect me, digi esp, digi jumpstart kit, device cloud by etherios, net+ and net+os are trademarks or registered trademarks of digi international inc. in the united states and other countries worldwide. arm and net+arm are trademarks or registered trademarks of arm limited. all other trademarks are the property of their respective own - ers. all information provided is subject to change without notice. 91001478 d4/1113 recommended pcb layout specifcations digi connect me ? 9210 digi connect wi-me ? 9210 digi service and support - you can purchase with confdence knowing that digi is here to support you with expert technical support and a strong fve-year warranty. www.digi.com/support buy online ? www.digiembedded.com digi service and support - you can purchase with confdence knowing that digi is here to support you with expert technical support and a strong fve-year warranty. www.digi.com/support digi international worldwide hq 877-912-3444 952-912-3444 digi international france +33-1-55-61-98-98 www.digi.fr digi international japan +81-3-5428-0261 www.digi-intl.co.jp digi international india +91-80-4287-9887 digi international singapore +65-6213-5380 digi international china +86-21-5150-6898 www.digi.cn
|
